Description

The HID or Xenon Ballast in your Lexus or Toyota vehicle is responsible for supplying power to your headlights bulb. Over time your HID Ballast can fail to result in a headlight that flickers or does not turn on at all. This AA Ignition HID Xenon Ballast includes the HID Ignitor and is a direct replacement for the ballast on your Lexus or Toyota vehicle. Every ballast is designed to connect directly to your vehicle and requires NO programming or coding.

Each of your vehicles headlights has its own ballast. These ballasts are commonly mounted either on the back or on the bottom of the headlight. While the HID Xenon Ballasts do commonly fail so can your factory headlight bulb. Please see our procedure below to determine if your factory HID Xenon Ballast has failed or if you simply need to replace your headlight bulb.

This HID Ballast Fits the Following Vehicles:

• 2007-2011 Lexus ES350
• 2006 Lexus GS300
• 2007-2011 Lexus GS350
• 2006-2007 Lexus GS430
• 2007-2011 Lexus GS450h
• 2008-2011 Lexus GS460
• 2006-2011 Lexus IS250
• 2006-2011 Lexus IS350
• 2008-2011 Lexus ISF
• 2007-2011 Lexus LS460
• 2008-2011 Lexus LS600h
• 2010-2011 Lexus RX350
• 2010-2011 Lexus RX450h
• 2006-2010 Lexus SC430
• 2008-2011 Toyota Avalon
• 2006-2009 Toyota Prius
• 2007-2008 Toyota Solara
• 2009-2010 Toyota Venza

Replaces the Following Part Numbers:

• 85967-52020
• 81107-30D30
• 81107-12A80
• DDLT003
• KDLT003

Bulb Out Warning Light On?

The bulb out warning light on your instrument cluster can signal that there is a problem with your headlights. While sometimes a bad headlight bulb can be to blame, it can also be a bad HID ballast. Follow our instructions below to confirm if your HID ballast is bad.

Fix Your Headlights for a Fraction of the Cost!

The headlights are an essential part of your vehicle and are a necessity for driving at night. Driving with a headlight out is not only dangerous but it’s also against the law.

This AA Ignition replacement HID Ballast is a direct replacement for your car’s factory HID ballast and will restore your headlight’s function.

Diagnosing a Bad HID Ballast!

Remove the Headlight Bulbs! If you just noticed that your headlight is out, open your hood and access the headlight bulb through the access port in the back	Inspect the Headlight Bulbs! Remove the headlight bulb and inspect it for any discoloration or cracks. A good headlight bulb will look like the one pictured above. If no discoloration is present, switch both headlight bulbs from one headlight to another.	Replace the HID Ballast! If the same headlight still does not light up replace your HID Ballast.